MaxiLink ML519
The MaxiLink ML519 OBD II/EOBD Scanner supports all 10 modes of OBD II testing for complete vehicle diagnostic scan. Featuring the patented One-Click I/M Readiness Key, TFT color display and built-in speaker, the MaxiLink ML519 is a powerful, yet, affordable code reader that enables technicians to quickly detect vehicle faults.
Compatible with domestic, Asian and European vehicles, 1996 and newer vehicles (OBD II & CAN)
Features the patented One-Click I/M Readiness Key for quick State Emissions readiness check and drive cycle verification
Color-coded LEDs and built-in speaker provide both visual and audible tone for readiness verification
Easily determines the cause of the Check Engine Light (MIL)
Retrieves generic (P0, P2, P3 and U0), manufacturer-specific (P1, P3 and U1) codes and pending codes
Turns off Check Engine Light (MIL), clears codes and resets monitors
Enhanced OBD II Mode 6 – On-board Monitoring Test Results for Specific Monitored Systems
Views freeze frame data
Reads live PCM datastream
Supports for the new extended sensor list (including the SAE-J1979 protocol)
Graphs data
Reads, stores & plays back live sensor data
Troubleshooter code tips guide technicians to the root cause of trouble code faster, saving diagnosis and repair time
Memory backup for off-vehicle data review and analysis
Retrieves vehicle identification information (VIN, CALID and CVN)
Internet updatable
Print data via Windows-based PC
Display | TFT color display (320×240 dpi) | |
Operating Temp. | 0 to 60 ℃ (32 to 140 ℉) | |
Storage Temp. | -20 to 70 ℃ (-4 to 158 ℉) | |
Power | 8.0 to 18.0 V provided via the vehicle battery | |
Dimensions (LxWxH) | 199 mm (7.83″) x 104.5 mm (4.11″) x 37.5 mm (1.48″) | |
Weight | 280 g (0.62 lb. without wire) 484 g (1.07 lb. with wire) |